How to Set Up Goldshell MiniDoge III WiFi Miner (700MH/s, 400W) for Litecoin & Dogecoin

Published September 05, 2025

How to Set Up Goldshell MiniDoge III WiFi Miner (700MH/s, 400W) for Litecoin & Dogecoin

The Goldshell MiniDoge III is a compact, energy-efficient Scrypt ASIC miner capable of delivering 700MH/s hash rate at 400W power consumption. It’s ideal for home miners who want to mine Litecoin (LTC) and Dogecoin (DOGE) without high electricity costs or complex setups.

This guide covers unboxing, WiFi setup, pool configuration, and monitoring, helping you get your MiniDoge III running efficiently.

1. Required Equipment and Preparations

Before starting, make sure you have:

  • Goldshell MiniDoge III unit

  • Power adapter and cable (included)

  • Stable WiFi network (2.4GHz recommended)

  • Mining pool account for Litecoin or Dogecoin (e.g., Flexpool, F2Pool)

  • Computer or mobile device to configure the miner

  • Proper ventilation to avoid overheating

💡 Tip: Although low-power, good airflow prolongs the miner’s lifespan.

2. Unboxing and Inspection

  1. Carefully unbox the MiniDoge III.

  2. Inspect for physical damage, including connectors, cables, or casing.

  3. Ensure all accessories are included (power cable, manual, screws).

  4. Place the miner on a stable, flat surface with enough airflow.

3. Power Connection

  1. Connect the power adapter to the miner.

  2. Plug the adapter into a standard AC outlet.

  3. Confirm the miner powers on; LED indicators should light up.

⚠️ Even low-power miners should be connected through a surge protector for safety.

4. Connecting to WiFi

  1. Ensure your WiFi is 2.4GHz; 5GHz is not supported.

  2. Use the Goldshell App or access the miner’s configuration page via a browser (default IP is provided in the manual).

  3. Enter your WiFi SSID and password to connect.

  4. Confirm the miner shows as connected in the app or web interface.

💡 Tip: Place the miner close to your router during setup to avoid connection issues.

5. Mining Pool Configuration

  1. Log into the miner’s web interface or app.

  2. Navigate to Pool Settings.

  3. Enter your pool’s URL for Litecoin or Dogecoin. Examples:

    • Litecoin: stratum+tcp://ltc.pool.com:3333

    • Dogecoin: stratum+tcp://doge.pool.com:3333

  4. Enter your Worker Name (usually your wallet address or pool format).

  5. Enter the password if required (often “x”).

  6. Save and apply settings.

The miner will begin hashing and submitting shares to your chosen pool.

6. Monitoring Performance

  1. Check the Status page in the app or web interface for:

    • Hashrate (should be near 700MH/s)

    • Temperature readings

    • Accepted/rejected shares

  2. Ensure the miner remains cool; airflow is sufficient for a small room setup.

  3. Restart the miner if it loses connection to the WiFi or pool.

7. Firmware Updates

  • Check the Goldshell website for firmware updates.

  • Update via the miner’s web interface or app to maintain efficiency, stability, and security.

8. Safety and Maintenance

  • Keep the miner in a cool, dust-free area.

  • Do not block ventilation openings.

  • Periodically check WiFi signal strength and pool connectivity.

  • Use a surge protector to prevent damage from power surges.

9. Troubleshooting

  • Miner not powering on: Check the power adapter and AC outlet.

  • Low hashrate: Verify pool settings and WiFi connection.

  • WiFi disconnects: Move miner closer to the router or reduce interference.

  • Overheating: Ensure proper airflow and clean dust from vents.

Conclusion

The Goldshell MiniDoge III WiFi Miner offers a low-cost, energy-efficient solution for mining Litecoin and Dogecoin at home. With only 400W consumption, it’s easy to set up and maintain.

Following this guide ensures your MiniDoge III runs reliably at 700MH/s, maximizing uptime and profitability while staying cool and efficient.